To check and change the transmission fluid in a Chevy Traverse, locate the dipstick under the hood and follow proper draining and filling procedures. Ensuring your Chevy Traverse runs smoothly requires regular maintenance, including monitoring and replacing the transmission fluid when necessary.

Routine checks of the transmission fluid can prevent performance issues and costly repairs down the line. Owners of the Chevy Traverse will find that maintaining the right level of clean fluid is crucial for the vehicle’s transmission to function properly.

Checking the fluid involves locating the transmission fluid dipstick, pulling it out, and examining the color and fill level. Changing the fluid, on the other hand, should be done with precision, as it typically requires lifting the vehicle to access the transmission pan.

It’s an important element of vehicle upkeep that helps extend the life of your Traverse and ensures a comfortable driving experience. Undertaking this process correctly could save you time and money, all while keeping your Traverse in peak condition.

How to Check & Refresh Your Traverse's Transmission Fluid

How to Check Transmission Fluid On Chevy Traverse

Maintaining your Chevy Traverse involves regularly checking the transmission fluid to ensure smooth operation and to avoid potential transmission issues.

It’s a simple process that you can do at home with minimal tools. Lets have a look in details..

Locating The Transmission Fluid Dipstick

To begin, you’ll need to find the transmission fluid dipstick under the hood of your Chevy Traverse. Follow these steps:

  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Open the hood by pulling the hood release lever located inside the cabin, usually near the driver’s side footwell.
  • Secure the hood with the prop rod if necessary.
  • Locate the dipstick, which is typically labeled and has a bright handle for easy identification. On a Chevy Traverse, the transmission fluid dipstick is usually found near the front of the engine compartment or on the side of the transmission housing.
  • Once you’ve located the dipstick, pull it out, and you’re ready for the next step.

Checking The Fluid Level

With the dipstick in hand, it’s time to assess the transmission fluid level and condition:

  1. Wipe the dipstick clean with a lint-free rag.
  2. Insert the dipstick back into the transmission fluid dipstick tube until it’s fully seated.
  3. Remove the dipstick again to check the fluid level. The fluid should be between the “Full” and “Add” marks. If the fluid doesn’t reach the “Add” mark, you’ll need to top up the transmission fluid.
  4. Examine the color and consistency of the fluid. Healthy transmission fluid is typically a bright, translucent red color. If you notice a burnt odor or a dark, opaque color, this may indicate the fluid needs to be changed.

Note the fluid level on the dipstick, If the level is adequate and the fluid is in good condition, no further action is required. However, if the level is low or the fluid seems contaminated, you should consider adding or changing the transmission fluid.

Making sure your Chevy Traverse has the correct amount of clean transmission fluid can prevent costly repairs and ensure the longevity of your vehicle. Regular checks like these are key to proactive vehicle maintenance.

How to Check & Refresh Your Traverse's Transmission Fluid

Changing The Transmission Fluid On Chevy Traverse

Maintaining your Chevy Traverse involves several important routines, with changing the transmission fluid being one of the essential maintenance tasks.

Over time, transmission fluid degrades and picking up contaminants that can damage your transmission. Regularly changing the transmission fluid can improve your vehicle’s performance and extend the life of your transmission.

Let’s walk through the steps required for changing the transmission fluid on a Chevy Traverse, ensuring your vehicle continues to run smoothly on the road.

Gathering The Necessary Tools And Materials

Before starting, collect all the tools and materials you’ll need:

  • Socket set
  • Torque wrench
  • Drain pan
  • Funnel
  • New transmission fluid (refer to your owner’s manual for the correct type)
  • Transmission fluid filter
  • Gaskets or washers for the drain plug

Finding The Transmission Fluid Drain Plug

Locate the transmission fluid drain plug underneath your Chevy Traverse. It’s typically situated on the lower part of the transmission pan. Ensure the vehicle is securely lifted or on ramps and that you have ample room to work safely.

Draining The Old Transmission Fluid

Position your drain pan under the plug, remove it with a socket set, and allow the old fluid to drain completely. Be mindful of hot components if the vehicle was recently driven.

Replacing The Transmission Fluid Filter

After draining the fluid, remove the old transmission fluid filter. It may require gently prying off or unscrewing, depending on its design. Install a new filter and make sure it fits snugly, following manufacturer recommendations.

Refilling With New Transmission Fluid

  1. Once the filter is replaced and the drain plug is securely tightened with a new washer or gasket, begin adding the new transmission fluid through the fill port using a funnel.
  2. Consult your owner’s manual for the exact amount of fluid required.

Testing The Fluid Level

After refilling, start the engine and let it run for a few minutes. Shift through the gears to circulate the fluid, then check the fluid level using the dipstick. Fill to the “Full” mark if needed, but avoid overfilling as this can cause complications.

How to Check & Refresh Your Traverse's Transmission Fluid

Frequently Asked Questions

How Do You Check Transmission Fluid On A Traverse?

To check the transmission fluid on a Traverse:

  • Warm up the engine by driving for a few minutes.
  • Park on a level surface and apply the parking brake.
  • Leave the car running and open the hood.
  • Locate the transmission dipstick, pull it out, and wipe it clean.
  • Reinsert the dipstick, remove it again, and check the fluid level.

How Often Do You Change The Transmission Fluid In A Chevy Traverse?

Change the transmission fluid in a Chevy Traverse every 45,000 to 100,000 miles, depending on usage and model year. Always consult the vehicle’s manual for specific recommendations.

How Much Does It Cost To Change Transmission Fluid In A Chevy Traverse?

The cost to change transmission fluid in a Chevy Traverse typically ranges from $150 to $200. Factors influencing the price include the service provider and regional labor rates.

Does A Chevy Traverse Have A Transmission Filter?

Yes, the Chevy Traverse is equipped with a transmission filter. It helps maintain fluid cleanliness and transmission longevity.

Conclusion

Maintaining your Chevy Traverse’s transmission fluid is essential for vehicle longevity. With the steps outlined, checking and changing the fluid can be straightforward.

Remember, regular maintenance keeps your Traverse running smoothly. Schedule check-ups and embrace the confidence of optimal vehicle performance.

Drive on with assurance, knowing you’ve taken proactive care of your transmission.